2元彩票

National Advisory Service Hotline: 400-6700-720 / 020-38937005

Position: 2元彩票 > Products > Ultem PEI > ULTEM > PEI >

Ultem PEI 2100-1000

2015-12-21 14:16

Ultem PEI 2100
10% glass fiber reinforced, good stiffness and dimensional stability. Excellent processability.
machining
Injection-USA
Processing group: ULT-IM-01
Note: Melt temperatures above 720F and / or excessive residence time at this temperature may affect color stability.
Drying time 4-6 hr
Drying temperature 300 deg F
Maximum drying time 24 hr
Moisture content (range) 0.02%
Melt temperature 660-750 deg F
Nozzle temperature 650-750 deg F
Front temperature 650-750 deg F
Mid-range temperature 640-750 deg F
Rear temperature 630-750 deg F
Mold temperature 275-325 deg F
Back pressure 50-100 psig
Screw speed 40-70 rpm
Barrel injection volume 40-60%
Clamping force tonnage 3-5 ton / in2
Mold exhaust groove depth 0.001-0.003 in
10% glass fiber reinforced, good stiffness and dimensional stability. Excellent processability.
performance
mechanical
performance Typical data unit method
Tensile Strength, Yield, Type I, 0.125 " 16600 psi ASTM D 638
Tensile Strength, Fracture, Type I, 0.125 " 16800 psi ASTM D 638
Tensile Extension, Yield, Type I 0.125 " 5.0 % ASTM D 638
Tensile Extension, Break, Type I 0.125 " 6.0 % ASTM D 638
Tensile Modulus, Type I 0.125 " 680000 psi ASTM D 638
Flexural Strength, Rupture, 0.125 " 29000 psi ASTM D 790
Flexural Modulus, 0.125 " 650000 psi ASTM D 790
Compressive strength 22000 psi ASTM D 695
Compression modulus 541000 psi ASTM D 695
Shear strength 13000 psi ASTM D 732
Hardness, Rockwell M 114 - ASTM D 785
Shock
performance Typical data unit method
Izod impact value, no gap, 73F 9.0 ft-lb / in ASTM D 4812
Izod impact value, notch, 73F 1.1 ft-lb / in ASTM D 256
heat
performance Typical data unit method
Vicat softening temperature, Class B 434 deg F ASTM D 1525
HDT (thermal distortion temperature), 66 psi, 0.250 ", unannealed 410 deg F ASTM D 648
HDT (thermal distortion temperature), 264 psi, 0.250 ", unannealed 405 deg F ASTM D 648
CTE (Coefficient of Thermal Expansion), flow, 0F ~ 300F 1 E-5 in / in-F ASTM E 831
Heat index 170 deg C UL 746B
Thermal index, mechanical shock performance 170 deg C UL 746B
Thermal index, non-mechanical impact performance 170 deg C UL 746B
physical
performance Typical data unit method
Specific gravity, solid 1.34 - ASTM D 792
Water absorption, 24 hours @ 73F 0.210 % ASTM D 570
Water absorption, equilibrium, 73F 1.20 % ASTM D 570
Mold Shrinkage, flow, 0.125 " 5-6 in / in E-3 ASTM D 955
Melt flow rate, nominal, 337C 6.6 kgf 6.3 g / 10 min ASTM D 1238
Electricity
performance Typical data unit method
Volume resistivity 1 E17 ohm-cm ASTM D 257
Dielectric strength, in oil, 62 mils 700 V / mil ASTM D 149
Dielectric constant, 1 kHz 3.50 - ASTM D 150
Loss factor, 1 kHz 0.0014 - ASTM D 150
Loss factor, 2450 MHz 0.0046 - ASTM D 150
Flame characteristics
performance Typical data unit method
UL file number, USA E121562 - -
V-0 rating (test thickness) 0.016 inch UL 94
CSA (see documentation for complete list) LS88480 Document number CSA LISTED
Oxygen index (LOI) 47.0 % ASTM D 2863
NBS smoke density, flame burning, Ds 4 min 1.8 - ASTM E 662
NBS smoke density, no fireworks, Dmax 20 min 27.0 - ASTM E 662

Working with Plastic Engine

You will get more mature professional engineering plastics supply services. We put customers first, and also actively challenge, and strive to present the best service quality to our customers.

Engineering Plastics Hotline:

400-6700-720
020-38937005

About Plastic Engine:
AG真人网 真人斗牛app 电玩竞技游戏 真人斗牛app 电玩游戏平台 电玩竞技游戏 皇冠体育官网 博狗直营