2元彩票

National Advisory Service Hotline: 400-6700-720 / 020-38937005

Position: 2元彩票 > Products > PPS > DIC > pps-dic >

dic-pps-FZ-6600

2015-12-15 14:33

overall
Material state
  • Commercial: currently active
Information 1
Processing-PPS (English) Technical Datasheet (English)
Search UL Yellow Card DIC Corporation DIC.PPS
Supply area
North America Asia-Pacific
Filler / reinforcement Glass fiber reinforced, 30% filler by weight
characteristic Low warpage
UL file number E53829
Exterior black
form Pellets
processing method Injection molding

Physical properties Rating Unit system Test Methods
proportion 1.57 ASTM D792
Shrinkage ASTM D955
flow 2.5E-3 in / in
Lateral flow 0.010 in / in
Water absorption (73 ° F, 24 hr) 0.060 % ASTM D570
hardness Rating Unit system Test Methods
Rockwell hardness ASTM D785
M scale 100
R scale 121

Mechanical behavior Rating Unit system Test Methods
Tensile modulus 1.60E + 6 psi ASTM D638
tensile strength 23200 psi ASTM D638
Elongation (break) 1.7 % ASTM D638
Flexural modulus 1.45E + 6 psi ASTM D790
Bending strength 31900 psi ASTM D790
Compressive strength 26100 psi ASTM D695
Poisson's ratio 0.37
Coefficient of friction ASTM D1894
With steel-dynamic 0.35
With steel-static 0.35
Bending strain at break 2.2 % ASTM D790
Impact performance Rating Unit system Test Methods
Notched Izod Impact Strength 1.2 ft • lb / in ASTM D256
Unnotched Izod Impact 9.0 ft • lb / in ASTM D256

Thermal performance Rating Unit system Test Methods
Heat distortion temperature (264 psi, unannealed) 446 ° F ASTM D648
Linear expansion coefficient ASTM D696
Flow: -22 to 194 ° F 1.3E-5 in / in / ° F
Horizontal: -22 to 194 ° F 1.3E-5 in / in / ° F

Electrical performance Rating Unit system Test Methods
Volume resistivity 1.0E + 16 ohm • cm ASTM D257
Dielectric Strength (0.0630 in) 410 V / mil ASTM D149
Dielectric Constant (1 MHz) 4.00 ASTM D150
Dissipation factor (1 MHz) 2.0E-3 ASTM D150
Arc resistance 120 sec ASTM D495
Flammability Rating Unit system Test Methods
UL flame retardant rating (0.0315 in) V-0 UL 94

injection Rating Unit system
Temperature behind the barrel 572 to 644 ° F
Central temperature of the barrel 572 to 644 ° F
Temperature at the front of the barrel 572 to 644 ° F
Mold temperature 248 to 302 ° F
Previous: No more
Next: dic-pps-FZL-4033

Working with Plastic Engine

You will get more mature professional engineering plastics supply services. We put customers first, and also actively challenge, and strive to present the best service quality to our customers.

Engineering Plastics Hotline:

400-6700-720
020-38937005

About Plastic Engine:
AG真人网 真人斗牛app 电玩竞技游戏 真人斗牛app 电玩游戏平台 电玩竞技游戏 皇冠体育官网 博狗直营